The details of a NBN Install

Our area was supposed to be getting NBN for a while now. We are in the Dapto second area to be turned on.

I was checking nbnco everyday to see if we were enabled and one day, instead of a “Building” I got an error on the site. I took this to be a good sign and ordered the NBN connection with Exetel.

That was the 2nd July 2014. I was told 30 days for the order to happen.

On the 28th July, I chased them as I hadn’t heard anything and was told “We are still waiting for an install time”. About 30 mins later I received my appointment for the 28th August. I presume they forgot to place the order with NBNco.

The first visit (20th August 2014) was interesting as I had no draw cable in the conduit. As we had a 30pr cable already running to the house, I disconnected it from the krone MDF and attached a rope to it. From the pit, we then pulled and it was quite easy to get the cable out and the ripe in. Once this was done, we just attached the fiber, the 30pr and a new rope to the end and pulled that all back in.

The fiber provided consisted of a roll about 100m long, with a screw plug on one end (this screws into the multiport) and no termination on the other end. They just measured it out and picked the best length from the truck. The pit with the multiport was just up from my house. There’s another pit just out the front of my house but it had no multiport in it. The problem is that the two are not connected directly. So, the fiber had to run under the road to another pit on the other side, then back from that one to the one out the front of my house.

So, after all this, the fiber was left hanging out of the ground conduit on the wall of my house with some tape on it. About 10m slack was coiled up.

On the 24th, The second time I got a call with the “We are here to install” I headed home again to make sure it was all ok. They turned up, complained that the first people didn’t finish properly, and put the Fiber box on the wall and plugged the service into the multiport (the box in the street that services about 4 houses). The cable was then looped into the box but not stripped down the single fiber.

2014-08-27 09.24.58

25th July, I emailled exetel and requested they send the config details so I could setup the router at home. After reading a few forums I decided an Airport Extreme (APE 6th gen) would be best and when they replied (a few hours later) I had all the username and password for the PPPoE connection. I configured the APE and just had it ready to plug in.

On the 27th, I got another call and they wanted to come out and do the install. My wife was home so I didn’t attend but he just stripped the cable and put a plug on the end of the fiber in the outside box.

2014-08-27 17.42.52

On the 28th, The “proper” appointment day, I took the morning off work so I would be there for the 8am – 12pm install window. At 11:30 I got a call (they were always good at calling first) to say he was late so I went to work. At 1:30pm, I got another call to let me know they were on their way so I headed home and was there just after they arrived.

The installers then had to remove the external box to put a new hole through the wall. there was already a service conduit for other cables but they wanted their own one. This done, the external box went back on, a patch lead passed through the hole and the inside work started.

It was easily mounted. Firstly there’s the power supply box, this takes 240v, has a battery inside and has an output lead ready for the network termination unit (NTU) or device (NTD) depending on who you talk to. Installing the NTU was also easy as I had power and cat6 cables there ready. Power was applied and the box lit up (as well as the powersupply lights).

The outside technician had an optical power meter that he used plugged in to both the internal and external connections. Normal loss is 15-20db apparently and I had 18 so that seems ok. Once this was done, he just butted them together inside the box and sealed it up and took photos.

Back to inside, They waited for the lights to be happy then he took some photos and had me sign the ipad to say its installed ok. It was then “activated” on the ipad and within about 3 mins, I was allowed to plug in the APE to one of the ports. I then connected my phone to the APE and did some basic tests. 50mbps down and 39 up so it was clearly working.

2014-08-29 06.50.57

After some reconfiguration work on my home network I now have it all working. Part of this was to remove the two ADSL connections we had. So, after turning on at about 2pm, getting it running on the whole house by about 3pm, everything looked lovely. This morning I checked the exetel site and apparently have uploaded 25,767.14 MB  and downloaded 35,354.15 MB till midnight last night. This will slow a lot once all the syncing and software updates are finished

TeamFocus Launches !

We have just launched our new collaborative task management system TeamFocus. It has inbuilt time tracking and workflows and is great for small to medium teams.

TeamFocus Launches & Raises $500K To Create The Most Complete Collaborative Task System

B2B Collaborative Task System Helps Companies Manage Teams In An Increasingly Mobile Workforce

March 10th, 2013 — Startup TeamFocus announces the launch of its collaborative task system, which is a modern web application created to keep teams in sync. TeamFocus, which has raised $500,000 in Angel-Investor funding, is a solution for the increasingly remote workforce, and provides organizations with the ability to easily keep track of tasks and work assignments.

Co-founder Kevin Withnall began developing the product 2 years ago, and initially created the product for internal purposes for his 12 person development company. Rather than trying to stay organized through emails and meetings, organizations can use TeamFocus to move faster, and better manage tasks.

Says Kevin, “We created TeamFocus because we didn’t see a product fulfilling the need in the market. We truly built this for our own company to scratch our own itch. TeamFocus was built to be the world’s most complete collaborative task system.”

TeamFocus provides team members with one central location where they can see what peers are working on and can receive updates on how a project is progressing. The B2B software is a comprehensive product and was designed from the start to evolve as an organization grew.

Examples of features in the product include Workflows, which allow individuals to move tasks along a customizable path. How to integrate workflows successfully into a task management system has long been been the goal of many productivity applications. Workflows in TeamFocus is not just a second tier feature, it is central to how TeamFocus operates.

Another key feature is Metrics, which helps determine tasks that have been sitting idle too long and are causing bottlenecks, all this while ensuring everyone focuses on completing the right tasks at hand. A full API will also be released later this year, which will allow companies to use TeamFocus Workflows and storage in their own applications.

In addition to the above, TeamFocus allows team members to record their time on each project task, as well as set and manage due dates. Not only are teams able to add detailed tags to projects, but they are able to view these from an easy to use search tool.

Says Co-Founder Jason Weaver, “Our goal with TeamFocus was to allow businesses large and small to break down projects into smaller parts, assign ownership to these, and then to track them until each part has been completed. We feel that companies are most effective when this is enabled.”

TeamFocus is free for the first 10 users, and charges a monthly subscriptions for subsequent users. The company also provides customized enterprise solutions.

TeamFocus was founded in 2009 by Kevin Withnall and Jason Weaver. Kevin Withnall, who worked with MSN in Australia, is the founder and CEO of a 12 person development firm. Jason Weaver was formerly a Project Manager at ING.

Our mission is to create a product that can best manage workflow between teams. TeamFocus, the world’s most complete collaborative task system.

Learn more about TeamFocus at: http://www.teamfocus.me/about-us/

About TeamFocus

TeamFocus was founded in 2009, when Kevin Withnall and Jason Weaver got together to solve a common problem: managing workflow between teams. The company is angel-investor backed and has raised $500,000 in funding.

Contact Information

Kevin Withnall, Co-Founder

Mobile: (+61 412 453846)

Skype: (kevinwithnall)

Email: kevin@teamfocus.me

Website: www.teamfocus.cme

Washington DC

I didn’t know that the smithsonian was so extensive. Its 19 separate museums and were/are great places to visit.

The first things I wanted to see were the Holocaust Memorial Museum, and the Air and Space museum.  These were great to visit but I also discovered lots more to see. The Natural History Museum was great, as was the Portrait gallery and the National Museum. The national archives was a little less interesting (probably more aimed at children) but it was interesting to see a 1296 copy of the Magna Carta. There was a line for about 40 mins to see the declaration of independence but no line at all for the magna carta.
The Spy Museum (not smithsonian) and the Crime and Punishment museum were interesting but also mainly directed at children, or at least people who don’t watch documentaries as often as I do.
Madame Tussads was really crappy. It could have been that I was expecting so much more after going to the ‘real’ one in london but this one wasn’t even as good as the wax museum in surfers paradise in Qld.
The postal museum was interesting, although also more for children, and had the postage stamp that we’ve all seen on television with the upside-down plane. I don’t know whats its worth but its always the example of expensive stamps.
The Lincoln monument was interesting (although very wet that day) and the Washington monument was also worth seeing (not that you could avoid it). In the same area the monuments were the WWII and Vietnam memorials, the Korean war memorial is a little further away and I didn’t get that far.
I didn’t get to the American Indian museum, the FBI building or the Capitol Building but they had to be missed as I ran out of time. I did get to go to the new Air and Space museum wing (the new one as the 1976 one was full) at Dulles Airport. Thats were the space shuttle enterprise is and the SR-71 Blackbird as well as lots of other things.
So, the things I saw that I will hopefully remember are…
Apollo 11 command module
Space Shuttle Enterprise (not that it was a finished space shuttle capable of space flight)
Magna Carta
The upside down stamp
SR-71
the Original ‘Wright Flyer’
Original Space Suits (from many of the moon trips)0
The X-1
The Enola Gay
Overall it was a great trip to washington as I managed to have it over a weekend where I didn’t have to do too much work and got to see some great stuff.
Enola Gay Enterprise
Marine One First Van De Graff Generator
Tanzonites
The Hope Diamond
IMG_0053
Enigma Machine (3 Rotor)
X-1 'The' Wright Flyer